If you’ve ever tried to run a root pass with a 7018 rod, you already know the problem. The puddle drops through, the arc blows out, and you’re left with a pile…
Author: Rod Mercer
If you’ve ever tried running a bead with a standard 1/8inch rod on a 90amp garage welder, you know the frustration. The arc sputters, the rod sticks, and you…
If you’ve ever welded thin steel, you know the struggle. One wrong move and you’re staring at a burnthrough instead of a clean bead. The best small diameter…
If you’ve been hunting for the best 7018 rods for 3/32 inch welding, you already know that picking the right electrode can make or break a project. Lowhydrogen…
Figuring out how to choose welding rod based on joint position is a real obstacle for a lot of welders. It doesn’t help that every rod has a different coating,…
If you’re just getting into stick welding, 6011 rods are probably going to be your best friend. They are tough, they cut through rust and paint, and they run…
If you’ve ever spent time under a welding hood battling a sputtering, unstable arc, you know the frustration of burning through rods that just won’t cooperate.…
Welding thin metal is a whole different ball game compared to welding thick plate. You need a rod that runs at low amperage, strikes a soft arc, and won’t blow…
If you’ve ever tried to weld rusted, pitted, or dirty steel with a standard rod, you already know the frustration. The arc sputters, the slag sticks, and…
You know the feeling. You’re on a job site, the generator is humming, and you need to lay down a root pass on a rusty pipe that’s been sitting in a ditch for…