Finding the best MIG welder for aluminum home projects usually comes down to one thing: can the machine feed soft aluminum wire without tangling it? We’ve…
Author: Rod Mercer
Aluminum welding without a spool gun sounds impossible to a lot of hobbyists, but these multiprocess inverter machines handle it differently than the old…
If you’ve ever fed soft aluminum wire through a long MIG liner, you know the drill: birdnesting, burnbacks, and a feed that fights you the whole way. A spool…
If you’re shopping for the best MIG welder for passing a welding test, you already know what’s at stake: clean beads, solid penetration, and a machine that…
You’re staring at a bead that looks like a burned garden hose. The machine’s dialed in, the argon’s flowing, and the amperage matches the material. Yet TIG…
That TIG thin metal heat distortion problem is one of the most frustrating things in welding. You line everything up, run what looks like a perfect bead, and…
TIG thin wall tubing overheating is one of the most frustrating problems in gas tungsten arc welding (GTAW). The symptoms show up in seconds, but the actual…
Your TIG pre flow not working shows up right at the trigger pull. You expect a hiss of argon, but you get silence. Or the gas only arrives after the arc…
Your TIG foot pedal full power problem is almost never the welder itself. It’s a pedal that suddenly sends full amperage no matter how far your toe presses the…
Your TIG welder suddenly goes full power the moment you press the pedal. The arc roars, the puddle blows through, and you’re left wondering what just broke.…