TIG welding without foot pedal sounds like a downgrade until you’ve done it right. The foot pedal has been the default way to control amperage for decades, but…
Browsing: TIG Welding
So you’re trying to decide between TIG welding with pulse vs without pulse, and honestly, the answer isn’t as simple as “one is better.” Pulse is a tool, not a…
TIG welding walking the cup for beginners sounds like a skill reserved for professional pipe fitters. The reality is simpler. It’s a technique where the torch…
Intro paragraphs: TIG welding dirty aluminum usually starts the same way. The arc sputters, the puddle turns grey, and your tungsten ends up looking like a…
If you’ve ever struck an arc on aluminum and watched the puddle turn gray, bubble, or spit black specks, you already know the problem. Dirty aluminum welds…
If you’ve ever watched a pipe welder lay down a flawless stainless cap pass, you’ve likely seen TIG welding walking the cup. It looks almost like the torch is…
Getting TIG aluminum AC frequency settings right can feel like chasing a ghost. The dial is right there, but no single number works for every weld. Frequency…
If you’ve ever struck an arc on aluminum and watched the puddle fight back, you know the frustration. That dark, sooty mess isn’t always a technique problem.…
If you’ve ever stared at a TIG aluminum settings chart and still ended up with a burntthrough mess or a cold, grainy bead, you’re not alone. The chart gives…
When your TIG weld turns blue, you’re likely staring at a bead and wondering if you’ve ruined the joint. The short answer: it depends on the metal you’re…